[webkit-dev] want to port JIT to MIPS - how to get of SSE2 now?

x yz lastguy at yahoo.com
Thu Feb 26 12:27:13 PST 2009


Hi,
Old version seems use ENABLE_JIT_OPTIMIZE_ARITHMETIC to enable sse2 and only for X86_64, current version changes conf to:
1. you must ENABLE_JIT_OPTIMIZE_ARITHMETIC or else you use interpreter for arithmatic. 
2. if ALTERNATE_JSIMMEDIATE not enabled you must have sse2 engine
3. if ALTERNATE_JSIMMEDIATE enabled, you use mmx arithematic, but ALTERNATE_JSIMMEDIATE is enabled in paltform.h only for X86_64 && MAC. That means on X86 you need sse2???
thanks for your time!
joe



--- On Sun, 2/22/09, x yz <lastguy at yahoo.com> wrote:

> From: x yz <lastguy at yahoo.com>
> Subject: Re: [webkit-dev] want to port JIT to MIPS
> To: "WebKit Development" <webkit-dev at lists.webkit.org>, "Gavin Barraclough" <barraclough at apple.com>
> Date: Sunday, February 22, 2009, 4:34 PM
> Thanks a lot otherwise I have misunderstanding. Yes I'll
> do wrec first. I just want to clean up possible blocking
> issues.
> 
> I see wrec uses regparm(3) and jit always use fastcall for
> X86?
> In JIT.cpp ctiTrampoline put CallFrame in edi, but how
> about other arguments - where are they be fetched/poped from
> stack? 
> 
> when deal with caller/callee saved regs, gcc MIPS just
> preserves them when necesasary. The problem is after JIT
> used gcc may not have enough knowledge on
> "necessary", do we have a way to force gcc always
> preserve 
> them? 
> 
> how to identify a patch (patchimm/patchptr/patchaddr)
> relates to a data field in an instruction or relates to an
> element in a data array? In Mips the former means the 32bit
> needs to be separated into two 16bits and patched into two
> instructions. But if a 32bit is a pointer in a pointer
> array, we can save it directly.
> 
> rgds
> joe
> 
> 
> --- On Fri, 2/20/09, Gavin Barraclough
> <barraclough at apple.com> wrote:
> 
> > From: Gavin Barraclough <barraclough at apple.com>
> > Subject: Re: [webkit-dev] want to port JIT to MIPS
> > To: "WebKit Development"
> <webkit-dev at lists.webkit.org>
> > Date: Friday, February 20, 2009, 2:01 PM
> > On Feb 19, 2009, at 8:27 PM, x yz wrote:
> > 
> > > I'd appreaciate your help to clarify the
> problem I
> > faced:
> > > 
> > > 1.In JIT.cpp I roughly understand ctiTrampoline()
> > except for sp-0x1C, I guess the 1C includes 6 argument
> yet
> > the 7th or 1st may be the hidden C++ pointer? And the
> > reserved 1C stack space seems not used? why esi is
> forced to
> > be 512 rather than use input argument?
> > 
> > The JIT allocates a fixed frame on the stack which is
> used
> > to pass arguments into stub functions.  The 0x1C
> contains a
> > spare word or two to maintain stack alignment.  %esi
> is used
> > in the timeout check mechanism.
> > 
> > > 2.How to understand the stack balance in
> > ctiVMThrowTrampoline()? why after calling we still add
> 1C
> > w/o sub 1C before calling? where comes
> > _ZN3JSC11Interpreter12cti_vm_throwEPPv and how do I
> know
> > which name for Mips? does this one relates to variable
> > argument function call?
> > 
> > ctiVMThrowTrampoline is never called as a function (it
> is
> > declared as a function only to provide a symbol that
> can be
> > manipulated from C code).  ctiVMThrowTrampoline is
> used in
> > returning back from JIT generated code, in the case of
> an
> > exception.
> > 
> > > 3.I know how to handle jump in Mips, but not sure
> > how/when to handle patchAddress/patchImm/patchPointer
> > because I'm not sure the instructions related. I
> guess
> > all patches are for last 32bit IMM field of
> instructions.
> > > Mips can't load 32bit in one instruction,
> thus I
> > need to know the instruction before I can patch/add in
> the
> > 32bit data.
> > > 
> > > 4.I'm kind of want no asm code outside
> > <assembler> folder, any plan for that?
> > 
> > No.  The assembler is intended to be independent of
> > JavaScript types - it's just an assembler.  The
> asm
> > trampolines are specific to the JIT.  It is currently
> the
> > intention that architecture specific parts of the JIT
> > implementation will remain in the jit folder.
> > 
> > I'd suggest that in attempting to port the jit,
> WREC
> > would be a good place to start.
> > 
> > cheers,
> > G.
> > 
> > > 
> > > rgds
> > > joe
> > > 
> > > --- On Mon, 2/16/09, x yz
> <lastguy at yahoo.com>
> > wrote:
> > > 
> > >> From: x yz <lastguy at yahoo.com>
> > >> Subject: Re: [webkit-dev] want to port JIT to
> MIPS
> > - when WREC/JIT enabled?
> > >> To: "Gavin Barraclough"
> > <barraclough at apple.com>
> > >> Cc: "WebKit Development"
> > <webkit-dev at lists.webkit.org>
> > >> Date: Monday, February 16, 2009, 5:25 AM
> > >> Hi,
> > >> from paltform.h it is enabled only on X86
> MAC/WIN;
> > from
> > >> javaScriptCore.pri it is also enabled for
> > (QT_ARCH,i386).
> > >> But, from config.log I see them are enabled!
> > >> 
> > >> how can I run WREC/JIT test so I can trace in
> X86
> > asm coce
> > >> generated?
> > >> thanks a lot.
> > >> joe
> > >> 
> > >> 
> > >> 
> > >> --- On Sat, 2/7/09, Gavin Barraclough
> > >> <barraclough at apple.com> wrote:
> > >> 
> > >>> From: Gavin Barraclough
> > <barraclough at apple.com>
> > >>> Subject: Re: [webkit-dev] want to port
> JIT to
> > MIPS -
> > >> using X86::ecx as base
> > >>> To: lastguy at yahoo.com
> > >>> Cc: "WebKit Development"
> > >> <webkit-dev at lists.webkit.org>
> > >>> Date: Saturday, February 7, 2009, 7:08 AM
> > >>> On Feb 6, 2009, at 2:52 PM, x yz wrote:
> > >>> 
> > >>>> 1.what's the meaning of
> > ALTERNATE_JSIMMEDIATE
> > >> and
> > >>> slow case?
> > >>> 
> > >>> On x86-64 we use a different
> implementation of
> > the
> > >> class
> > >>> JSImmediate.  See JSImmediate.h.
> > >>> Re 'slow case', in the JIT code
> > generation is
> > >>> performed as two passes over the bytecode
>> > see
> > >>> JIT::privateCompileMainPass and
> > >>> JIT::privateCompileSlowCases.
> > >>> 
> > >>>> 2.how come the following code can use
> ECX
> > as base
> > >>> register?
> > >>>> load32(Address(X86::ecx,
> > FIELD_OFFSET(Structure,
> > >>> m_typeInfo.m_flags)), X86::ecx);
> > >>>> if the X86::ecx just means its value
> 1 in
> > ModR/M,
> > >> does
> > >>> it means [BX+DI]?
> > >>> 
> > >>> I think you're looking at the old
> 16-bit
> > >> addressing
> > >>> mode tables; 32/64-bit x86 can happily
> encode
> > ecx as a
> > >> base
> > >>> register.  If you're looking at the
> Intel
> > IA-32
> > >> manual
> > >>> volume 2, see table 2-2 on the next page.
> > >>> 
> > >>>> 3. can anybody help me on my previous
> > questions?
> > >> does
> > >>> JIT support floating point?
> > >>> 
> > >>> Yes, some.  See JITArithmetic.cpp.
> > >>> 
> > >>> cheers,
> > >>> G.
> > >> 
> > >> 
> > >> 
> > >>
> _______________________________________________
> > >> webkit-dev mailing list
> > >> webkit-dev at lists.webkit.org
> > >>
> >
> http://lists.webkit.org/mailman/listinfo.cgi/webkit-dev
> > > 
> > > 
> > > 
> > 
> > _______________________________________________
> > webkit-dev mailing list
> > webkit-dev at lists.webkit.org
> >
> http://lists.webkit.org/mailman/listinfo.cgi/webkit-dev
> 
> 
>       
> _______________________________________________
> webkit-dev mailing list
> webkit-dev at lists.webkit.org
> http://lists.webkit.org/mailman/listinfo.cgi/webkit-dev


      


More information about the webkit-dev mailing list